Description
Key Features
- Immediately absorbs hydrocarbons retaining up to 3x its own weight
- No release of hydrocarbons and extremely low-pressure drop when saturated
- Cost-effective hydrocarbon removal at high flow rates*
- 25m rating, used solely for oil reduction
- Specialised for Hydrocarbon Reduction – Suitable for the polishing of trace hydrocarbons, the OilOut-99 is capable of absorbing up to three times its own weight before changeout is required. Designed to remove up to 99% of dispersed hydrocarbons, the SPECTRUM SRIF is suited to applications where the inlet contamination is below 500mg/l, such as surface run off water, CNC machine coolant and bilge separators. The OilOut-99 achieves best results as a polishing phase after primary oil removal technologies or in a double-pass system and is effective at removing a range of contaminants, including mineral oils and BTEX hydrocarbons
* With a complex range of oils and hydrocarbons, including emulsified and dissolved, it is always recommended that a small scale trial is conducted to validate cartridge performance.
Typical Applications
- Surface runoff water
- CNC coolant
- Bilge water treatment
- Engineering waste water
Specification
- Average Oil Removal (G) –
Standard Diameter – 375
Large Diameter – 1,500
- Carbon Type – Resin Impregnated Felt
- Netting -Polyethylene
- Core: Polypropylene
- Wrap: Polypropylene
- End-Caps –PolypropyleneDOE (Double Open-Ended)
- Gasket: Buna-N
- Max Operating Temperature – 70C
- Max Operating Pressure Differential – 1.4Bar
- Material:Resin Impregnated Felt
- Performance: Excellent Hydrocarbon
- Micron: 25
- Length:20″
- Diameter:Large (4.5″)
- End-Cap –DOE (Double Open-Ended)
- Seal:Buna-N
- Flow Rate (lpm):40
Oilout-99 Properties
| Length (“) | Average Oil Removal (G) | Pressure Drop (Bar) | Flow Rate (LPM) |
| 9 3/4 | 375 | 0.11 | 20 |
| 20 | 750 | 0.11 | 40 |
| 30 | 1,125 | 0.11 | 60 |
| 40 | 1,500 | 0.11 | 80 |
| 9 3/4BB | 1,500 | 0.08 | 20 |
| 20BB | 3,000 | 0.08 | 40 |
Reviews
There are no reviews yet.