Description
Yes, shipping is free. Due to the machine’s weight and dimensions, liftgate delivery is not a safe option you will need either a forklift available on site or the ability to pick up from a local freight terminal.
Is the Minimax FS 41ES-T eligible for a Section 179 tax deduction?
Yes. The Minimax FS 41ES-T qualifies as a capital equipment purchase under Section 179, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. See how much you could save with our Section 179 calculator.
Features
Parallelogram jointer tables: Infeed and outfeed tables connect mechanically and unlock simultaneously with a single lever. Eight cam points four per table maintain coplanarity through the full range of jointing height adjustment. Re-verification after height changes is not necessary in normal use.
Tersa cutterhead: 95mm diameter, 4 double-sided HSS knives. Knives self-index on installation no setup, no tools required. Full knife change in under a minute. Preferred by furniture makers for final-pass surface quality on hardwoods.
Single-lever changeover: The guard stays in place. The fence moves to the operator-side position but does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90. The dust port stays on the same side of the machine and floats between functions the hose does not move.
4-post planer table: Four dust-protected trapezoidal-threaded columns provide long-term dimensional stability under daily use. Planer table size: 16.125″ 30.5″ (410 775mm).
Powered planer bed movement: LED digital readout displays table height to 0.1mm resolution. Accurate height setting without a handwheel.
Jointer fence: 1,200mm 150mm, center-mounted directly over the cutterhead via a rigid round-bar support. Tilts 045. Additional overturning fence included for thin workpieces.
True single-phase motor: 4.8hp, 230V. Some competing combination machines use a three-phase motor derated through a VFD to run on single-phase power, which reduces actual output. This is a purpose-built single-phase motor. No VFD, no phase converter. Dedicated 30A circuit required.
Two feed speeds: 23 fpm for heavier cuts, thicker stock removal, and finish passes; 46 fpm for moving dimension stock through quickly.
OSHA-compliant spring guard: American-style spring guard ships standard. Always covers the unused portion of the cutterhead without requiring manual repositioning when the fence moves. A European-style guard is available as an accessory through OakTree.
Mortising table pre-setting: Ships with mortising table pre-setting installed. The 016mm self-centering chuck attaches directly and is compatible with the FS 41 family. Mortising chuck available separately.
Mobility kit: Wheels included standard.
Specs
Jointer
Working Width: 16″ (410mm)
Overall Table Length: 87″ (2,200mm)
Cutterhead Diameter: 95mm (3.74″)
Cutterhead Speed: 5,000 RPM
Max. Depth of Cut: 0.1875″
Fence Tilt: 045
Fence Dimensions: 1,200mm 150mm (47.2″ 5.9″)
Planer (Thicknesser)
Planer Table Size: 16.125″ 30.5″ (410 775mm)
Max. Working Thickness: 9.44″ (240mm)
Min. Working Thickness: 0.125″ (3mm)
Max. Stock Removal: 1/8″
Feed Speeds: 23 fpm / 46 fpm
Infeed Roller: Helicoidal steel
Outfeed Roller: Rubber-coated
Electrical & Dust
Motor: 4.8hp, 230V, single-phase
Recommended Circuit: 30A dedicated
Machine Weight: 1,285 lbs.
Dust Port Diameter: 4.7″ (120mm)
Minimum CFM Required: 600 CFM
Includes
- Tersa cutterhead (installed) with 4 double-sided HSS knives
- Jointer fence (1,200mm 150mm) with center-mount round-bar support
- Additional overturning fence for thin workpieces
- OSHA-compliant American spring guard
- Mobility kit (wheels)
- Tool set and operator’s manual
Warranty
SCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.
Shipping
Please note: Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.
*Machinery Availability Key
Availability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.
In stock for immediate shipment: The machine is in OakTree Supply’s warehouse and is ready to ship.
In stock as of [date] / Low stock as of [date]: The machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability.
Estimated to ship [date]: The machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.
Dates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.
[/TABS]
Reviews
There are no reviews yet.