Description
[pdf] [/pdf]
Also Known As:
The Fast-Cure anaerobic adhesive-style fiber optic connector shall meet or exceed the requirements described in ANSI/TIA-568-C.3 and 604 standards. All plastic components shall be molded of 94 V-0 rated plastic. The connector shall be field-polished, field-installable, and does not require a curing oven or proprietary tool to facilitate the termination of the fiber.
About:
Leviton’s Hardener and Primer Kit contains the adhesive and primer you need to terminate any FASTCURE connector, such as adhesive, primer, a syringe, and needle for your convenience. A Material Data Safety Sheet is included.
Common Applications:
Tarps and Canopies: To reinforce holes for ropes or ties that secure tarps or canopies in place, especially in outdoor settings.
Curtains and Drapes: For creating reinforced holes at the top of curtains that can be used to hang them on a rod.
Banners and Signs:To reinforce holes used to hang or secure banners and signs, making them more durable for long-term or outdoor use.
Cable Pass-throughs: In desks and workstations to manage cables neatly and protect them from the sharp edges of drill holes.
Automotive: In car upholstery or for managing wires and hoses, to prevent chafing against metal or other hard surfaces.
Features:
Typical termination in less than three minutes
Low insertion loss connection
Higher fiber retention than mechanical connectors
No curing oven or proprietary tool required
Compatible with MOS, QuickPort, SDX, and LightSpace adapter plates
Accessory for duplex clip sold separately
Standards:
ANSI/TIA-568-C.3 performance requirements
ANSI/TIA-604-2 (ST), -3 (SC), -10A (LC) Connector Intermateability Standards
GR-326; General Requirement for Single-mode Connectors
Construction:
The construction of an Adhesive/Accelerator Kit typically includes components that are used in conjunction to create a strong bond between materials, often in industrial, automotive, or crafting applications.The kit usually consists of an adhesive, which is the primary bonding agent, and an accelerator, which is designed to speed up the curing process of the adhesive.
Reviews
There are no reviews yet.