Description
Oil-based Seal-A-Cell is a unique combination of oils and waxes that penetrates deep into wood, highlighting its natural beauty with a “close to the wood” finish. Seal-A-Cell ambers over time while providing water- and chemical-resistance.
Seal-A-Cell is designed to be used as a basecoat forGF Arm-R-Seal but can be used as a stand-alone finish.It can also be used as a wood conditioner to control the penetration of stains or intermix with GF oil-based stains to dilute or create custom colors.
Also available in pints.
[TABS]
Specs
Product colors: Dries Amber
Base type: Oil
Ambering: Yes
Sheen: Gloss (80+)
Interior or exterior: Interior only
Type:Oil, Urethane & Wax Blend
Coats: 1-2 coats
Application method: Brush
Sprayable: No
Dry Time – Touch: 12+ hrs.
Dry Time – Recoat: 24+ hrs.
Dry Time – Light Use: 7-10 days
Dry Time – Cure: 30 days
Coverage:100-125 sq. ft.
Viscosity: Thin
Preparation
- Sand open grain wood with 120 grit sandpaper, followed by 150 grit, then 180 grit. Sand closed grain wood with 150 grit sandpaper followed by 220 grit.
- Remove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.
Directions
- Stir thoroughly to reincorporate solids that have settled to the bottom of the can before use.
- Test for adhesion
- Apply a liberal amount of product using a natural bristle brush, foam brush, pad applicator, staining pad or cotton cloth. Wipe along the wood grain using smooth, even strokes. Avoid heavy pressure and back brushing.
- Wipe off excess evenly with the grain and with light pressure using a cloth or absorbent paper towel.
- Apply first coat of topcoat before sanding.
Video
[/TABS]
Reviews
There are no reviews yet.