General Finishes Satin Finishing Wax – 8 oz.

Description

Satin Finishing Wax is a special blend of waxes designed to give finished woods a rich luster. It can be used as a polish for rubbing out new finishes or as a scratch-remover for worn surfaces. It works well over both oil- and water-based finishes, including Danish Oil. We recommend a wet-sanding process followed by buffing to a soft silky sheen.

Don’t forget your sandpaper!

[TABS]

Specs

Product Color: Clear
Ambering: No
Interior or Exterior: Interior
Type: Accent Wax
Application Method: Wipe On with Clean Rag
Usable over existing finishes: Yes
Sprayable: No

Video

Directions

Light Polishing:

• Shake container well.
• Wipe on a thin, even coat with a clean cloth.
• Let sit 10 minutes.
• Polish with a soft cloth, wiping away the excess in the direction of the wood grain.

Buffing A Topcoat To A High Gloss:

• Shake container well.
• Wipe on a thin, even coat with a clean cloth.
• Let sit 1-2 minutes.
• Buff off excess with a buffing or sanding pad (see below) in the direction of the wood grain. The higher/finer grit you use, the easier it will be to achieve a high-gloss finish.

Fixing A Scratch:

• Shake container well.
• Do not sand “dry-on-dry” to remove scratch marks.
• Add Satin Wax as a lubricant on the pad AND on the surface of your project, then spread smooth with a rag.
• Let sit 10 minutes.
• Polish with a soft cloth, wiping away the excess in the direction of the wood grain.

[/TABS]