4.8KW 208V Single-Phase Forced Electric Ceiling Heater F3387D-RP

Description

The heaters shall be constructed with a heavy-gauge steel housing, finished with a baked-on powder coat in Ceiling White color. The units will be available in wattage ratings ranging from 1500 to 4800 Watts, with an optional factory-installed single-pole thermostat. Each heater features a low-speed 600 RPM motor, driving a vane axial blower to deliver quiet, efficient airflow of 175 CFM in a downflow direction. The heating element shall be of the block finned type, with large, parallel steel fins to facilitate quick heat transfer. For added safety, the unit will come standard with a manual reset capillary-type limit control.

Features :

Fan purge circuit (requires a 2-wire control circuit when a remote wall thermostat is used with the unit).

Disconnect switch.

White powder-coated 18-gauge steel grill.

Manual reset thermal limit.

Steel block fin element.

Vane axial fan blade:

1. 1.5KW – 4.0KW units: 700 RPM motor, 175 CFM

2. 4.8KW units: 900 RPM motor, 200 CFM

Rough-in dimensions: 14 3/16″ wide x 19 5/16″ high x 4″ deep.

Grill dimensions: 15 3/8″ wide x 20 9/64″ high.

Optional factory-installed tamper-resistant thermostat available.