14 AWG 3C Type MC-HL W/G Corrugated Welded Armor XLPE/PVC Jacket VFD Cable 600V

Description

[short] [pdf] [/pdf]

14 AWG 3C Type MC-HL W/G Corrugated Welded Armor XLPE/PVC Jacket VFD Cable 600V

Application:

Type MC-HL ARMOR-X control cables are suited for use in wet and dry areas, conduits, ducts,troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. Thesecables are capable of operating continuously at the conductor temperature not in excess of 90C for normal operation in wetand dry locations, 130C for emergency overload, 250C for short circuit conditions. For uses in Class I, II, and III, Division 1and 2 hazardous locations per NEC Article 501, 502, and 503.

Also Known As:

14 AWG 3C MC-HL VFD cable 600V, corrugated welded armor cable, XLPE PVC jacketed VFD cable, MC-HL cable with welded armor, 14 AWG 3C VFD control cable 600V, MC cable XLPE PVC welded armor, corrugated armor VFD cable, XLPE PVC VFD MC cable 600V, welded armor MC-HL VFD cable, 14 AWG 3C 600V MC-HL VFD cable XLPE.

Standards:

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
UL 44 Thermoset-Insulated Wires and Cables
UL 1569 Metal-Clad Cables
UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
UL 2225 Cables and Cable-Fittings For Use In Hazardous (Classified) Locations
CSA C22.2 No. 123 Metal Sheathed Cables
CSA C22.2 No. 174 Cables in Hazardous Locations
ICEA S-58-679 Control Cable Conductor Identification Method 1 Table 2
ICEA S-73-532 Standard for Control, Thermocouple Extension and Instrumentation Cables
ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

Construction:

Conductor:7 strands class B compressed copper per ASTM B3 and B8
Insulation:Cross Linked Polyethylene (XLPE) Type XHHW-2
Grounding Conductor:3 Class B compressed stranded bare copper ground per ASTM B3 and B8
Filler:Polypropylene filler on cables with 5 or less conductors
Binder:Polyester flat thread binder tape applied for cables with more than 5 conductors
Armor:ARMOR-X Continuous Corrugated Welded Armor
Overall Jacket:Polyvinyl Chloride (PVC)

Specifications:

Size:14 AWG
Number of Conductor:3
Number of Strands:7
InsulationThickness (Mil):30
Ground No. x AWG: 3 x 18
Diameter Over Armor(inch): 0.530
Jacket Thickness (mil):50
Approx. OD (In): 0.636
Copper Weight lb/1000ft: 53
Approx. Weight (Lbs/1000’Ft): 191
DC Resistance @ 25C /1000ft: 2.631
AC Resistance @ 75 /1000ft: 3.170
Inductive Resistance /1000ft: 0.058
Min Bending Radius (In): 4.5
Allowable Ampacity At75C (Amp): 20
Allowable Ampacity At 90C (Amp): 25