1000′ 1/0 AWG 3C + 3#10 AWG Ground Wire VFD Cable 2KV

Description

1/0 AWG 3C + 3#10 AWG Ground Wire VFD Cable 2KV

Three Conductor Variable Frequency Drive Cable 2000V UL Type TC-ER

Application:

Three Conductor Variable Frequency Drive 2000V Cables are primarily used with AC motors controlled by pulse-width modulated inverter in VFD applications rated up to 2000 Volts. Suitable for installation in cable trays, raceways, or direct burial. They also may be installed in wet or dry locations and are permitted for use in Class I – Div 2, Class II – Div 2, and Class III – Div 1 and 2 industrial hazardous locations.

Conductors:

Fully annealed bare copper Class B compressed strand per ASTM B-8

Ground(S):

3 symmetrically placed annealed bare copper conductors in direct contact with shield. Class B stranding per ASTM B-8

Insulation:

Heat and moisture resistant, chemically cross-linked polyethylene (XLPE) insulation

Shielding:

Overall 5 mil annealed bare copper tape shield, helically applied with 50% overlap and 100% coverage

Jacket:

Lead-free, flame-retardant polyvinyl chloride (PVC) jacket that is sunlight, weather, chemical and abrasion resistant
Meets cold bend test at -25C and crush and impact requirements for Type MC Cable

Standards:

UL Listed as TC-ER (Exposed Run) per UL Standard 1277 as defined by NEC for 3 or more conductors
UL Type RHH or RHW-2 conductors per UL 44
Flame Rated: IEEE (70,000 BTU), IEEE 1202/CSA FT-4, ICEA T-29-520 (210,000 BTU, 1/0 AWG and larger), Twohour Firewall
Rated 90C wet or dry
Direct Burial
Approved for Class 1 and 2, Division 2 and Class 3, Divison
1 and 2 industrial hazardous locations per NEC
REACH Compliant

Specification:

Part Number: 1/0-03VFD-3G-2KV
Conductor Size: 1/0 AWG
Conductor Stranding: 19W
Ground Wire(s) Size: 3#10 AWG
Insulation Thickness: 0.08 Inches
Jacket Thickness: 0.08 Inches
Overall Diameter: 1.40 Inches
Weight: 1749 lbs/mft
Ampacity: 170 amps