SuperMax 25-50 Drum Sander with Closed Stand & Mobile Base

Description

The SuperMax 25-50 Drum Sander is the largest open-ended drum sander on the market. It has the capacity to sand a workpiece as wide as 25 in a single pass, and up to 50 in a double pass. Expand your scope of projects while increasing speed and consistency. Sand everything from stock as short as 2-1/4″ or as thin as 1/32″! The 25-50 Drum Sander comes standard on the Closed Mobile Base Stand.

INTELLISAND technology on the 25-50 Drum Sander prevents gouging and reduces the potential for burning stock by automatically adjusting conveyor speed based on load. It incorporates infinitely variable speed settings (0-10/min) for the ultimate control of conveyor settings.

Details on the 25-50 Drum Sander prove that a lot of consideration went into the design of this machine. The drum carriage is bolted to the base, preventing any movement or alignment issues. The precision-flattened steel conveyor bed is reinforced with four steel cross sections, guaranteeing flatness to less than .010 across the width of the sander.

Optional Accessories

• 25″ Abrasive Wraps
• Folding Infeed/Outfeed Tables
• Digital Thickness Readout
• Abrasive Cleaning Stick

All Laguna Tools woodworking machinery carry a 2-year warranty. Must register machine within 30 days of purchase.

Compare Models >

[TABS]

Features

• 25″ sanding in a single pass, 50″ in a double pass
• INTELLISAND Technology automatically adjusts conveyor speed if required and also prevents gouging stock or damage to the motors
• Fast Adjust Lever offers an extremely quick and accurate adjustment for proper alignment when sanding material wider than the drum
• More room for easy access to abrasives- no special tool needed
• Self-cooling drum prevents overheating and extends abrasive life
• Tension rollers are adjustable for pressure and contact, preventing snipe and maintaining proper feeding of material
• Closed stand has built-in wheels and storage
• Mobile base helps stand and machine to move with ease

Specs

Max. Sanding Width: 50 (Two Passes)
Min. Sanding Length: 2-1/4
Max. Sanding Thickness: 4
Min. Sanding Thickness: 1/32
Dimensions (D x W x H): 27 x 46 x 53 (On Stand)
Drum: 5 x 25 Extruded Aluminum
Drum Speed: 1,740 RPM
Dust Hood: 1 4 Vacuum Port, Min. 600 CFM Recommended
Conveyor Motor: 43 in.-lb torque, direct drive D.C. motor, ranged variable 0-10 FPM
Drive Motor (TEFC): 1.75HP
Power Requirements: 110V, 20 amp
Table Height (Floor To Top Of Table): 33
Shipping Weight: 369 lbs. (3 boxes including stand)
Shipping Dimensions (L x W x H): 45 x 16 x 24

[/TABS]