General Finishes Wood Bowl Finish – Quart

Description

Wood Bowl Finish is a durable oil-and-urethane oil-based finish designed for use on decorative wooden bowls and turnings. Its high-quality resins form a durable film with an amber tone that brings out the natural beauty in wood such as maple, walnut, and cherry.

For countertops actively used for chopping and cutting, we recommendButcher Block Oil.

Don’t forget yourbrushesandsandpaper!

[TABS]

Specs

Product colors: Dries Amber
Base type:Oil
Interior or exterior:Interior only
Type: Oil & Urethane
Sheen:Gloss (80+)
Coats:3 coats
Application method:Brush, Roll, Spray
Useable over existing finishes:Yes
Spray tip sizes:HVLP 1.0mm-1.2mm
Dry time – touch:12+ hrs.
Dry time – recoat:24+ hrs.
Dry time – light use:7-10 days
Dry time – cure:30 days
Coverage:100-150 sq. ft.
Viscosity:Thin
Durability (Highest, High, Medium, Low): High

Preparation

1. Sand open grain wood with 120 grit sandpaper, followed by 150 grit, then 180 grit. Sand closed grain wood with 150 grit sandpaper followed by 220 grit.
2. Remove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.

Directions

1. Stir topcoat thoroughly to reincorporate solids that have settled to the bottom of the can before use. Urethane topcoats are thin and the flatting agents used to create flatter sheens settle quickly to the bottom. Either stir and decant what you need to use immediately or stir frequently throughout the application process.
2. Hand application: Apply a liberal amount of product using a cotton cloth, natural bristle or foam brush, staining pad with smooth, even strokes & light lap lines. The larger the surface the larger the applicator needed. Wipe off the excess evenly with the grain & with light pressure using a cloth or absorbent paper towel.
3. Finish sand between coats with a 220-320 grit foam sanding pad to improve smoothness and adhesion.
4. Remove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.

Video

[/TABS]