Lamello Bisco P-14 P-System Connectors

Description

For use with Zeta P2 Handheld Joiners or CNC Router with P-System tooling.

At a Glance:

• Plastic biscuit that fits the same groove as the Clamex P-14 Connectors no need to change cutters
• Used in combination with Clamex P-14 or Tenso P-14
• For the flush alignment of panels, as well as for gluing, stiffening, and increasing shear strength
• Also good for dry-fitting connections prior to final assembly with Clamex or Tenso

The Details:

Bisco P-14 plastic biscuits are an alignment element designed to be used with Clamex P-14 Connectors. They ensure the flush alignment of panels, as well as increase connection strength. Bisco P Connectors are also good for dry-fitting connections prior to final assembly with Tenso P-14 Connectors.

Thanks to their surface structure, Bisco P-14 Connectors are self-clamping, meaning there is no gluing inside the groove required. The Bisco serves to align the workpieces and fits into the P-System groove without the need to change cutters. Ideal for dry connections or when still deciding whether the parts will be glued or should be detachable.

Bisco P-14 Connectors are available to purchase on their own, as well as in theProfessional Starter Set and the Basic Starter Set. These starter sets are a great way to become familiar with Lamello’s full line of P-System Connectors. Plus, you’ll always have a nice Systainer to store your connectors in for years to come!

Looking for the smaller connectors? See Bisco P-10 >

[TABS]

Features

• Fits the same P-System groove as Clamex P-14, thus removing the need to change cutters
• Self-clamping in the groove due to its surface structure
• Fixed connections possible in conjunction with PVA glue
• Lateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine
• Alignment of grooves on separation walls, table tops, or kitchen worktops
• Combination with Clamex P-14 for detachable surface, corner or miter joints ranging from 30 to 180
• Combination with Clamex P-14 or as a simple element for gluing workpieces
• Stiffening or raising shear strength

Specs

Size: 65 x 27 x 7mm
Installation tolerance longitudinal: 2mm
Cutter dia.:100.4 x 7 x 22mm or 100.9 x 7 x 22mm
Min. workpiece width: 75mm

Video

[/TABS]