Description
Standard HSS handles the majority of hardwood and softwood work oak, maple, walnut, cherry, pine. M42 cobalt is worth the premium for shops regularly processing resinous species like pine, cedar, or teak, or any material that accelerates knife wear. Cobalt edges hold significantly longer on tough stock, which reduces knife change frequency and cost over time.
What dust collection do I need?
980 CFM minimum through a 120mm (4.7″) port. A jointer produces significant shaving volume. A collection system that is marginal for this requirement will fill quickly and create accumulation inside the machine cabinet. Confirm your existing system meets this requirement, or plan for a dedicated collector before the machine arrives.
What clearance does the machine need?
The fence rides on a bar that extends behind the machine. When the fence is moved to the far end of its travel, that bar projects beyond the rear of the machine’s footprint. Plan for adequate clearance behind the machine before finalizing the floor layout. Shops pairing this machine with a standalone planer typically position both in a dedicated work cell where the clearance requirements of each machine are accounted for together.
What if I need both a jointer and a planer?
A jointer flattens one face and one edge it cannot thickness stock to a consistent dimension. If you are setting up a complete milling workflow, the SCM Nova S 520 and the SCM Class S 630 are the appropriate standalone planers to pair with this machine.
What is the warranty?
SCM warrants the machine against defects in workmanship and materials for one year from the date of customer acceptance. Belts, bearings, and common electrical components carry a six-month warranty. Wearable items and routine maintenance are not covered.
Is this eligible for a Section 179 tax deduction?
Yes. The Nova F 410 T qualifies as a capital equipment purchase under Section 179 of the U.S. tax code, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. See how much you could save with our Section 179 calculator.
Can I get installation and training?
Yes, available at time of purchase. Once the machine has been delivered, largely assembled, and has 220V 3-phase power and dust collection accessible nearby, an SCM factory-trained or certified dealer technician will complete final setup, bring the machine to ready-to-run condition, and conduct hands-on training on site. Electrical service, floor work, and dust collection connections are the shop’s responsibility prior to the technician’s visit. Add installation and training to your order before checkout.
Features
Tersa Straight Knife Cutterhead: 4 knives, 410mm 35mm 3mm. Centrifugal locking no tools, no setting gauge required. Knife change under two minutes. Two-sided knives; flip to use both edges. Available in HSS or M42 cobalt.
Cast Iron Tables, Ribbed: Aged cast iron, ribbed for rigidity. 57″ infeed and 451/2″ outfeed for 1023/4″ of total working surface.
Parallelogram Table Movement, 4 Cams Per Table: Each table pivots on four eccentric cam points, one per corner, maintaining consistent table-edge-to-cutterhead proximity across the full depth range. Alignment is dialed in at each corner independently with a wrench. No shimming. Tables are independent castings, removable and serviceable individually.
Anodized Aluminum Fence, 471/4″ x 71/2″: Tilts from 0 (square) to 45 for beveled edge work on stock. Fence bar extends behind the machine at the far end of its travel plan for adequate rear clearance before installation.
American Spring Guard, OSHA Compliant: Spring-loaded guard pivots away from the cutterhead as the workpiece passes and automatically returns to the closed position when released. The European Smart Lifter guard is not standard on the Nova F 410 T it is available on the L’Invincibile F 7 X.
120mm Dust Port: 4.7″ port. Minimum 980 CFM required. The machine produces significant shaving volume confirm your collection system meets this requirement before delivery.
Specs
Motor: 8 HP, 3-phase, 220V
Total Table Length: 1023/4″ (2,610mm)
Infeed Table Length: 57″ (1,450mm)
Outfeed Table Length: 451/2″ (1,160mm)
Table Width: 161/8″ (410mm)
Max Depth of Cut: 5/16″ (8mm)
Cutterhead Type: Tersa 4 straight knives
Knife Dimensions: 410mm 35mm 3mm
Knife Alloy Options: HSS, M42 cobalt
Cutterhead Diameter: 4.7″ (120mm)
Cutterhead Speed: 5,000 RPM
Fence Dimensions: 471/4″ 71/2″ (1,200 190mm)
Fence Tilt: 0 to 45
Table Movement: Parallelogram 4 eccentric cams per table
Dust Port Diameter: 120mm (4.7″)
Dust Extraction Minimum: 980 CFM
Overall Dimensions: 105″ 44″
Net Weight: 1,851 lbs (840 kg)
Shipping Weight: 2,140 lbs (970 kg)
Warranty
SCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.
Shipping
Please note: Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.
*Machinery Availability Key
Availability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.
In stock for immediate shipment: The machine is in OakTree Supply’s warehouse and is ready to ship.
In stock as of [date] / Low stock as of [date]: The machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability.
Estimated to ship [date]: The machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.
Dates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.
[/TABS]
Reviews
There are no reviews yet.