General Finishes Extender – 4 oz.

Description

Extender is a wetting additive used to improve flow and leveling. It increases the drying time of any water-based stain, topcoat, or glaze, which is helpful in hot, dry conditions.

Also available in a pint.

Shipping Notice: During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.

[TABS]

Specs

Product Colors: Clear
Base Type: Water
Ambering: No
Interior or Exterior: Interior/Exterior
Type: Performance/Additive
Application Method: Add up to 15% to water based products.

Instructions

General Finishes Extender is a water-based wetting additive that can be used to extend the drying time of all General Finishes water based topcoats, stains, primers, glazes and paints. Do not use with oil-based products.

• Work in a well-ventilated area.
• Slowly add 10-15% by volume if allowed by local regulations to lengthen the drying time of GF water-based products.
• Stir thoroughly to incorporate GF Extender into coating.
• Test product.

All mixes of General Finishes water-based products containing up to 15% General Finishes Extender or General Finishes Accelerator can be stored.

[/TABS]