Lamello E20-H Self-Clamping Connectors

Description

For use with anyLamello Joiner or biscuit joiner with a 4mm groove cutter.

At a Glance:

• Self-clamping connector thanks to its ridged surface
• Both workpieces cut at the same time to form the groove
• Connects with a few hammer taps
• Join without clamps or waiting for glue to dry
• Use with any Lamello Biscuit Joiner
• Ideal for drawer boxes, miters, cabinets, etc.

The Details:

The E20 is a self-clamping connector that works with any Lamello Biscuit Joiner, making it an easy upgrade to your joinery applications. The E20-H is ideal for edge joints like drawer boxes. Each connector has curved ridges that lock it in place once its inserted and tapped with a hammer, giving you a secure, hassle-free hold. These connectors eliminate the need for clamping glued workpieces and waiting for them to dry, saving you tons of time in the shop.

For an E20-H surface connection, start by positioning your two workpieces where they need to be, with the edge facing up. Clamp them together and cut a 4mm groove across both pieces so each one holds half of the slot. Apply glue to the edges, bring the parts together, and tap the E20-H connector into the slot with a hammer. As the ridged, angled profile slides in, it locks the joint securely and draws the workpieces tightly together in one motion.

E20-H Connectors are also available in a mixed pack with E20-L Connectors.

[TABS]

Features

• Connects and clamps with a hammer
• Curved ridges clamp pieces together upon insertion
• Both workpieces are cut at the same time
• Join without clamps or waiting time for glue to dry
• Install with any Lamello Biscuit Joiner

Specs

Size: 23 x 28 x 4mm
Cutter dimensions: 100 x 4 x 22mm

Video

[/TABS]