1000′ 500 MCM MV105 EPR Insulation PVC Jacket Shielded 100% Or 133% Insulation Copper Power Cable 5KV / 8KV

Description

[short]

500 MCM MV105 EPR Insulation PVC Jacket Shielded 100% Or 133% Insulation Copper Power Cable 5KV / 8KV

Applications:

The mv105 copper cable is an electrical wire used for power circuits up to 5,000 Volts when fixed in open air, conduit, or duct; in applications such as chemical plants, refineries, steel mills, industrial plants, commercial buildings, utility substations, and generating stations. The National Electric Code accepts this electrical cable for uses within 90C for continuous operation, 130C for emergency overload conditions, and 250C for short circuit conditions.

Also Known As:

500 mcm medium voltage power cables, 500 mcm mv power cable, 500 mcm mv105 cable, 500 mcm mv105, 500mv power cable, 500mv105 cable, 500mv105.

Standards:

• ICEA S-93-639
• NEMA WC74
• AEIC CS8
• Federal Specification J-C-30B

Construction

Conductors:

The MV power cable conductor is made of soft bare copper per ASTM B-3, Class B stranding per ASTM B-8 (compressed), or ASTM B-496 (compact), with a semi-conducting conductor shield.

Insulation:

The MV power cable has cross-linked polyethylene (XLP) insulation. The conductors are normally cabled together with XLP insulated aluminum ground or bare copper ground and covered with reinforced binder tape. XLP insulation is tough and resistant to impact, abrasion, chemicals, acids, oils, industrial solvents, and changes in weather.

Shield:

Shielding wires meet ICEA standards.

Jacket:

Reinforced insulation is provided by a PVC jacket, which is sunlight-resistant, per ICEA S-97-682 and UL Standard 1072.

Specifications:

• AWG Size: 500
• Number of Strands: 37
• Insulation Diameter Min:0.990Inches
• Insulation Diameter Max: 1.065Inches
• Insulation Thickness:0.115 Inches
• JacketThickness: 0.08Inches
• Outside Diameter: 1.27 to 1.282 Inches (May slightly vary based on brands)
• Net Weight (Lbs/1000FT): 2024.7
• Omni: MVE250001

[/short]