Description
| Kilowatt (KW) | 1.5 |
| BTU | 5,120 |
| Voltage | 120V |
| Phase | 1 |
| Amperage | 12.5 A |
| CFM | 175 |
| Listed | cETLus Listed |
TPI 3380 Series Commercial Fan-Forced Ceiling Heaters offer optimal heating performance for commercial spaces. With heating wattages up to 4,800 watts, these units come with an optional factory-installed tamper-resistant thermostat. The TPI heater also includes a fan purge circuit, designed for use with a remote wall thermostat.
The heaters are constructed with a heavy-gauge steel housing, finished in a baked-on powder coat in Ceiling White color.The heaters are equipped with a low-speed, 600-RPM motor driving a vane axial blower to deliver a quiet 175 CFM of downward airflow. The heating element is of the block-finned type with large, parallel steel fins for rapid heat transfer. For added safety, each unit includes a manual reset capillary-type limit control.
Features :
Fan purge circuit (requires a 2-wire control circuit when a remote wall thermostat is used with the unit)
Disconnect switch
White powder-coated 18-gauge steel grille
Manual reset thermal limit
Steel block fin element
Vane axial fan blade:
1. 1.5 kW – 4.0 kW units: 700 RPM motor; 175 CFM
2. 4.8 kW units: 900 RPM motor; 200 CFM
Rough-in dimensions: 14 3/16″ wide x 19 5/16″ high x 4″ deep
Grille dimensions: 15 3/8″ wide x 20 9/64″ high
Optional factory-installed tamper-resistant thermostat is available
Reviews
There are no reviews yet.