10/2 Heavy Duty Flat W/GRND THW/submersible Pump Cable Copper Navy Blue PVC Jacket 600V

Description

[pdf] [/pdf]

[short]

10/2 Heavy Duty Flat W/GRND THW/submersible Pump Cable Copper Navy Blue PVC Jacket 600V

Allowable Ampacity:

• 30 Amps (based on NEC guidelines for THW conductors in wet locations)

Applications:

This submersible pump cable is designed for continuous submersion in deep wells, water systems, and irrigation setups. It supplies power from the control panel to single-phase 230V submersible pumps and operates at 600 volts with a temperature rating of 60C (140F) in wet conditions.

• Size 10/2 Usage: This well pump wire is designed for 2-wire deep well submersible pumps that do not require a control box. It is commonly used in residential, farm, and small commercial well installations for pump motors up to 3 HP.

Also Known As:

10/2 THW cable, 10/2 flat THW cable, 10/2 conductor THW, 10/2 THW electrical wire, 10/2 THW stranded wire, 10/2 submersible pump cable, 10/2 submersible wire, 10/2 submersible electrical cable, 10/2 submersible power cable, 10/2 borewell cable, 10/2 heavy-duty submersible pump wire, 10/2 heavy-duty submersible cable, submersible pump wire, submersible well pump wire, wiring submersible well pump.

Standards:

• RoHS Compliant
• UL 83
• National Electric Code (NEC)
• UL Listed as Type THW Submersible Pump Cable

Construction:

Conductor:

• Stranded soft annealed copper for flexibility and ease of installation.
• Two current-carrying conductors plus a green ground wire, designed for 2-wire submersible pump systems.
• Resistant to oil and grease.

Insulation:

• Thermoplastic PVC insulation for protection against mechanical stress.

Jacket:

• Navy Blue thermoplastic PVC jacket resistant to weather, ozone, sunlight, acid, alkali, and oil.

Specifications:

• Gauge: 10
• No. of Conductors: 2
• Ground Size: 10
• O.D. Inches: .305 x .729
• New Weight lb/1000FT: 210 lbs
• Ampacity: 30 Amps (600V rated)

Compatible with Manufacturer
Mil Spec : 500ft	31711000
Mil Spec : 1000ft	31711C20

[/short]

Applications:

For use within the well casing to supply power to the
submersible pump
Designed for use where extra mechanical protection
and flexibility during installation and operation are required

Description:
UL listed Type THW heavy duty flat submersible pump cable is a multi-purpose cable with parallel, individually insulated, color coded conductors, green ground insulated conductor and an overall jacket. Construction provides flexible copper stranding insulated with Type THW (PVC) compound. A tough PVC jacket, with a non-penetrating web, is easily stripped to facilitate installation yet provide optimum flexibility, mechanical protection and crush resistance.
UL listed as Type THW Submersible Pump Cable
Acid, alkali, oil and grease resistant
Weather, ozone and sunlight resistant jacket
Abrasion and crush resistant
Sequential footage marks

Standards:
UL Standard 83; RoHS Compliant

Construction:
Conductors:Flexible stranded soft annealed copper
Insulation:Thermoplastic PVC Color coding: black, red, yellow, green (ground)
Assembly:The insulated conductors, including the grounding conductor, are configured flat and parallel without fillers
Jacket: Navy Blue thermoplastic PVC applied directly over the conductors with a non-penetrating web
Temperature:75C
Voltage:600